Slide background




IEC 60580:2019

ID 9607 | | Visite: 2027 | News NormazionePermalink: https://www.certifico.com/id/9607

IEC 60580:2019 Medical electrical equipment - Dose area product meters

IEC 60580:2019 specifies the performance and testing of Dose Area Product Meters intended to measure Dose Area Product and/or Dose Area Product Rate to which the Patient is exposed during Medical Radiological Examinations. This document is applicable to the following types of Dose Area Product Meters:
a) Field-Class Dose Area Product Meters normally used for the measurement of Dose Area Products during Medical Radiological Examinations;
b) Reference-Class Dose Area Product Meters normally used for the Calibration of Field-Class Dosimeters.

NOTE Reference-Class Dose Area Product Meters can be used as Field-Class Dose Area Product Meters.

The object of this document is
1) to establish requirements for a satisfactory level of performance for Dose Area Product Meters, and
2) to standardize the methods for the determination of compliance with this level of performance.
Two levels of performance are specified:
– a lower level of performance applying to Field-Class Dose Area Product Meters;
– a higher level of performance applying to Reference-Class Dose Area Product Meters.

IEC 60580:2019 cancels and replaces the second edition published 2000, and constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous edition:
a) a second class of devices is introduced with tighter uncertainty tolerances;
b) this document has been expanded to include detectors other than ionization chambers;
c) radiation qualities have been updated to the new definitions according to IEC 61267;
d) a requirement on the linearity of the dose area product rate measurement was added;
e) changed chamber light transmission requirement from 70 % to 60 %.

Descrizione Livello Dimensione Downloads
Allegato riservato IEC 60580 2019 Preview EN.pdf
 
360 kB 2

Tags: Normazione Norme IEC

Articoli correlati

Ultimi archiviati Normazione

Apr 25, 2025 279

UNI EN ISO 22361:2023

UNI EN ISO 22361:2023 / Linee guida gestione delle crisi di un'organizzazione ID 23878 | 25.04.2025 / In allegato Preview UNI EN ISO 22361:2023Sicurezza e resilienza - Gestione delle crisi - Linee guidaData disponibilità: 08 giugno 2023 La norma fornisce una guida sulla gestione delle crisi per… Leggi tutto
Apr 17, 2025 586

UNI EN 13018:2016

UNI EN 13018:2016 / PND Esame visivo ID 23833 | 17.04.2025 / Preview allegata UNI EN 13018:2016 Prove non distruttive - Esame visivo - Principi generali Data disponibilità: 21 giugno 2016________ La norma specifica i principi generali per l'esame visivo, sia diretto sia remoto, qualora sia… Leggi tutto
Apr 17, 2025 601

UNI 11627:2016

UNI 11627:2016 / Apparecchiature saldatura a gas manuali - Verifiche periodiche ID 23832 | 17.04.2025 / Preview allegata UNI 11627:2016Apparecchiature per saldatura a gas - Attrezzature gas manuali di saldatura, riscaldo e taglio - Verifiche periodiche Data disponibilità: 10 marzo 2016________ La… Leggi tutto

Più letti Normazione