The IMDG Code, 2016 Edition comes into force on 1 January 2018 for two years and may be applied voluntarily as from 1 January 2017.
There are many changes to the 2016 edition of the International Maritime Dangerous Goods Code (IMDG Code). The signi cant changes are outlined below.
There have been signi cant changes in Part 2 Classification, to include:
- a method of using test data to classify substances that are listed in the Dangerous Goods List (DGL) but meet the classi cation criteria for a hazard classor division that is not identi ed in the list; - new criteria and documentation requirements for assigning reworks to hazard divisions; - the addition of new criteria for determining viscosity in Class 3 ammable liquids; - the inclusion of polymerizing substances under Class 4.1; - new sections de ning gases, ammable liquids, toxic substances, and corrosives that are not accepted for transport.
New packing instructions have been added: P005 for the new Engine proper shipping names under UN3528, UN3529 and UN3530; P412 for the new UN3527 “POLYESTER RESIN KIT, solid base material”; and P910 for the prototype and low production runs of lithium cells and batteries.
A new large packaging packing instruction LP200 for aerosols has been added.
A new Class 9 Miscellaneous Dangerous Goods label has been adopted for use when shipping lithium metal and lithium ion cells and batteries (new SP384).
The “Overpack” mark now has a 12 mm minimum height requirement.
New ISO standards have been incorporated into the applicable packing instructions for gases and the design and construction criteria of UN pressure receptacles and multiple-element gas containers.
Updates to the DGL:
- The proper shipping name entries for Engines and Vehicles under UN3166 have been separated. UN3166 now covers only “Vehicle” entries and “Engines” now fall under new UN3528, UN3529, and UN3530 entries.
- Polyester resin kits have been separated into two entries: UN3269 “POLYESTER RESIN KIT, liquid base material” and new UN3527 “POLYESTER RESIN KIT, solid base material”.
- Polymerizing substances of Class 4.1 have been assigned to new entries UN3531, UN3532, UN3533 and UN3534.
- Special provisions for shipping certain common items have been added, revised, or removed:
- SP188 now requires a standardized lithium battery mark for excepted shipments of lithium cells and batteries.
- SP312, 363, 961 and 962 have been revised; SP380 and 385 have been added; and SP970 has been removed due to the separation of the proper shipping name entries for Engines and Vehicles.
- SP236 now includes Class 4.1 solid base materials for polyester resin kits.
- SP310 the lithium battery prototype and low production packaging requirements have been moved to a new packing instruction (P910).
CEI 64-8 Ed. 9a / 2024: pubblicata sul sito CEI il 26 luglio 2024 - Inizio validità 1° Novembre 2024 ID 22329 | 26.07.2024 / Download Scheda allegata Pubblicate le 8 Parti della nuova edizione della norma CEI 64-8 (Ed. 9a) / 2024 con inizio validità dal 1° Novembre 2024: CEI 64-8/1…
Leggi tutto
Report ACI-ISTAT incidenti stradali 2023 (Data pubblicazione: 25 Luglio 2024) ID 22328 | 26.07.2024 / Documenti allegati Il 2023 è caratterizzato da una stabilizzazione nella mobilità rispetto al 2022, anno nel quale era stato rilevato un netto incremento, in termini di spostamenti registrati,…
Leggi tutto
Regolamento di esecuzione (UE) 2024/1975 ID 22236 | 26.07.2024 Regolamento di esecuzione (UE) 2024/1975 della Commissione, del 19 luglio 2024, recante modalità di applicazione della direttiva 2014/90/UE del Parlamento europeo e del Consiglio per quanto riguarda i requisiti di progettazione,…
Leggi tutto
Italia procedura di infrazione UE non corretto recepimento direttiva quadro sui rifiuti ID 22325 | 25.07.2024 La Commissione invita l'ITALIA a recepire correttamente la direttiva quadro sui rifiuti. La Commissione ha deciso di avviare una procedura di infrazione inviando una lettera di costituzione…
Leggi tutto
Strategia Italiana per l’Intelligenza Artificiale 2024-2026 / AGID 2024 ID 22324 | 25.07.2024 / In allegato Il testo è stato elaborato da un Comitato di esperti per supportare il Governo nella definizione di una normativa nazionale e delle politiche sull’IA. A seguito della pubblicazione dell’AI…
Leggi tutto
Monitoraggio dei LEA attraverso il Nuovo Sistema di Garanzia / Min Salute 2024 (Dati 2022) ID 22323 | 25.07.2024 / In allegato Il Sistema di Garanzia rappresenta lo strumento attraverso il quale il Governo assicura a tutti i cittadini italiani che l’erogazione dei livelli essenziali di assistenza…
Leggi tutto
Measuring Europe’s plastics circularity - through the lenses of the EEA Circularity Metrics Lab ID 22322 | 25.07.2024 The unsustainable production, consumption, and end-of-life management of plastics lead to significant environmental and climate impacts. However, evidence concerning the circular…
Leggi tutto
Legge "Liste di attesa": Testo approvato Camera il 24.07.2024 - Atteso in GU ID 22321| 25.07.2024 / In allegato il testo approvato Il Decreto-Legge 7 giugno 2024, n. 73 “liste di attesa” (GU n.132 del 07.06.2024) è stato convertito in Legge il 24.07.2024 dopo l'approvazione definitiva in seconda…
Leggi tutto
Interpello ambientale 05.07.2024 - Bonifiche aree agricole e Trs ID 22320 | 25.07.2024 / In allegato Testo interpello Ambientale L’art. 27 del decreto-legge n. 77 del 31 maggio 2021 ha introdotto, all’art. 3 septies del D.lgs. 152/2006, l’istituto dell’interpello in materia ambientale, che consente…
Leggi tutto
Interpello ambientale 05.07.2024 - Bonifiche aree agricole e Trs ID 22320 | 25.07.2024 / In allegato Testo interpello Ambientale L’art. 27 del decreto-legge n. 77 del 31 maggio 2021 ha introdotto, all’art. 3 septies del D.lgs. 152/2006, l’istituto dell’interpello in materia ambientale, che consente…
Leggi tutto
UNI 9994-1:2024 | Estintori di incendio: Controllo iniziale e manutenzione ID 22319 | 25.07.2024 / Preview in allegato UNI 9994-1:2024 Apparecchiature per estinzione incendi - Estintori di incendio - Parte 1: Controllo iniziale e manutenzione La norma prescrive i criteri per effettuare il controllo…
Leggi tutto
ISO 16000-40:2019/Amd 1:2024 / Indoor air quality management system ID 22313 | 24.07.2024 / In allegato ISO 16000-40:2019/Amd 1:2024 Indoor air - Part 40: Indoor air quality management system Amendment 1:2024: Climate action changes This document specifies requirements for an indoor air quality…
Leggi tutto
Interpello ambientale 22.07.2024 - Bombole gas non ricaricabili ID 22274 | 24.07.2024 / In allegato Testo interpello Ambientale L’art. 27 del decreto-legge n. 77 del 31 maggio 2021 ha introdotto, all’art. 3 septies del D.lgs. 152/2006, l’istituto dell’interpello in materia ambientale, che consente…
Leggi tutto
La valutazione dei rischi in ottica di genere / INAIL 2024 ID 22311 | 24.07.2024 / In allegato La pubblicazione è organizzata in una parte generale per inquadrare e contestualizzare il tema della valutazione dei rischi in ottica di genere, una parte applicativa riportante delle schede di rischio…
Leggi tutto
Linee guida sui requisiti di sicurezza e prestazione dei dispositivi per uso veterinario / 2024 ID 22299 | 21.07.2024 / In allegato Linee guida sui requisiti di sicurezza e prestazione dei dispositivi per uso veterinario Ministero della salute - Anno 2024 ... Fonte: Ministero della salute…
Leggi tutto
Sviluppo di una procedura sperimentale per la caratterizzazione ecotossicologica dei rifiuti ID 22298 | 21.07.2024 / In allegato Il Regolamento (CE) 2017/997 stabilisce le modalità per l’attribuzione della caratteristica di pericolo HP14 "ecotossico". Il Regolamento stabilisce i criteri per…
Leggi tutto
Norme serie ISO 10791-X | Prescrizioni di collaudo per centri di lavorazione - Status Luglio 2024 ID 22294 | 20.07.2024 / Elenco completo in allegato Elenco serie norme ISO 10791-X “Prescrizioni di collaudo per centri di lavorazione”. Nel dettaglio: - UNI ISO 10791-1:2015 Prescrizioni di collaudo…
Leggi tutto
Semplificazione dei controlli sulle attività economiche / D.Lgs. 103/2024 ID 22293 | 20.07.2024 / Documento completo in allegato Pubblicato nella GU n. 167 del 18 luglio 2024 il decreto legislativo 12 luglio 2024 n. 103, recante la disciplina sulla semplificazione dei controlli sulle attività…
Leggi tutto