IGC Code (International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk)
ID 3631 | 14.02.2017
The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code), adopted by resolution MSC.5(48),has been mandatory under SOLAS chapter VII since 1 July 1986. The IGC Code applies to ships regardless of their size, including those of less than 500 gross tonnage, engaged in carriage of liquefied gases having a vapour pressure exceeding 2.8 bar absolute at a temperature of 37.8°C, and certain other substances listed in chapter 19 of the Code. The aim of the Code is to provide an international standard for the safe carriage by sea in bulk of liquefied gases and the substances listed in chapter 19, by prescribing the design and construction standards of ships involved in such carriage and the equipment they should carry so as to minimize the risk to the ship, to its crew and to the environment, having regard to the nature of the products involved.
The basic philosophy is one of ship types related to the hazards of the products covered by these codes, each of which may have one or more hazard properties. A further possible hazard may arise owing to the products being transported under cryogenic (refrigerated) or pressure conditions.
Severe collisions or strandings could lead to cargo tank damage and uncontrolled release of the product. Such release could result in evaporation and dispersion of the product and, in some cases, could cause brittle fracture of the ship's hull. The requirements in the codes are intended to minimize these risks as far as is practicable, based upon present knowledge and technology.
Throughout the development of the Code it was recognized that it must be based upon sound naval architectural and engineering principles and the best understanding available as to the hazards of the various products covered; furthermore that gas carrier design technology is not only a complex technology but is rapidly evolving and that the Code should not remain static. Therefore, IGC Code is kept under review, taking into account experience and technological development. The latest comprehensive amendments of the IGC Code were adopted by resolution MSC.370(93), expected to enter into force on 1 July 2016.
Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code) and Code for Existing Ships Carrying Liquefied Gases in Bulk (EGC Code)
Gas carriers constructed before 1 July 1986 and after 31 October 1976 should comply with the requirements of the Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code), while gas carriers that had already been trading prior to the application of the GC Code should comply with the requirements of the Code for Existing Ships Carrying Liquefied Gases in Bulk.
Macchine alimentari: Regolamento macchine & MOCA / Rev. 0.0 Giugno 2025 ID 24105 | 12.06.2025 / In allegato documento completo Il presente documento illustra le disposizioni in merito alle macchine e prodotti correlati alimentari contenute nel Regolamento (UE) 2023/1230 e la disciplina MOCA.…
Leggi tutto
Nuovo rilascio per la piattaforma RENTRI - 11.06.2025 ID 24104 | 12.06.2025In data 4 giugno 2025 è stato effettuato un nuovo rilascio per la piattaforma RENTRI. Di seguito sono riportate le principali novità. Area operatori - Pratica di variazione per cancellazione UL: apportate modifiche per…
Leggi tutto
Interpello ambientale 11.06.2025 - Trattamento di fanghi provenienti da terzi in impianti di depurazione acque reflue urbane ID 24103 | 12.06.2025 / In allegato Testo interpello Ambientale L’art. 27 del decreto-legge n. 77 del 31 maggio 2021 ha introdotto, all’art. 3 septies del D.lgs. 152/2006,…
Leggi tutto
UNI CEN/TR 14380:2025 Applicazioni illuminotecniche - Illuminazione delle gallerie ID 24102 | 12.06.2025 / In allegato Preview Il rapporto tecnico descrive la prassi attuale nella progettazione dell'illuminazione di gallerie e sottopassaggi stradali per il traffico motorizzato e misto. Si tratta di…
Leggi tutto
UNI ISO 4301-5:2025 / Gru a ponte e a cavalletto - Classificazione ID 24101 | 12.06.2025 / In allegato Preview UNI ISO 4301-5:2025 Apparecchi di sollevamento - Classificazione - Parte 5: Gru a ponte e a cavalletto La norma stabilisce una classificazione generale delle gru a ponte e a cavalletto e…
Leggi tutto
Costruire il Futuro - Off-Site e Riqualificazione Edilizia in Italia ID 24100 | 11 giugno 2025 Realizzata dell’ambito del progetto OFFICIO per lo sviluppo di una filiera italiana del settore Il potenziale innovativo dell’Off-Site Construction (OSC), una panoramica della filiera italiana ad esso…
Leggi tutto
Documento Programmazione Vigilanza INL 2025 ID 24099 | 11.06.2025 / In allegato Documento di Programmazione della Vigilanza INL 2025 L’attività di vigilanza dell’Ispettorato Nazionale del Lavoro è da sempre volta a contrastare il lavoro sommerso e lo sfruttamento dei lavoratori, ovvero tutte le…
Leggi tutto
ECHA 2025 - Key Areas of Regulatory Challenge ID 24098 | 11.06.2025 / Attached The report introduces new topics to reflect ECHA’s growing responsibilities. It also covers emerging topics in waste and recycling that aim to support circularity and enhance Europe’s industrial competitiveness. For…
Leggi tutto
CEI EN IEC 60204-11 / Equipaggiamento elettrico delle macchine AT ID 24095 | 10.06.2025 / Preview in allegato Classificazione CEI: 44-15 Data pubblicazione: 05.2025 CEI EN IEC 60204-11Sicurezza del macchinario - Equipaggiamento elettrico delle macchine Parte 11: Prescrizioni per l'equipaggiamento…
Leggi tutto
Cassazione Penale Sez. 4 del 04 Giugno 2025 n. 20645 / Caduta del lavoratore per difetto chiusura sponda autocarro: responsabilità DL ID 24094 | 09.06.2025 Cassazione Penale Sez. 4 del 04 Giugno 2025 n. 20645 - Difetto nella chiusura della sponda dell'autocarro noleggiato e caduta all'indietro del…
Leggi tutto
Macchine alimentari: Regolamento macchine & MOCA / Rev. 0.0 Giugno 2025 ID 24105 | 12.06.2025 / In allegato documento completo Il presente documento illustra le disposizioni in merito alle macchine e prodotti correlati alimentari contenute nel Regolamento (UE) 2023/1230 e la disciplina MOCA.…
Leggi tutto
Interpello ambientale 11.06.2025 - Trattamento di fanghi provenienti da terzi in impianti di depurazione acque reflue urbane ID 24103 | 12.06.2025 / In allegato Testo interpello Ambientale L’art. 27 del decreto-legge n. 77 del 31 maggio 2021 ha introdotto, all’art. 3 septies del D.lgs. 152/2006,…
Leggi tutto
UNI CEN/TR 14380:2025 Applicazioni illuminotecniche - Illuminazione delle gallerie ID 24102 | 12.06.2025 / In allegato Preview Il rapporto tecnico descrive la prassi attuale nella progettazione dell'illuminazione di gallerie e sottopassaggi stradali per il traffico motorizzato e misto. Si tratta di…
Leggi tutto
UNI ISO 4301-5:2025 / Gru a ponte e a cavalletto - Classificazione ID 24101 | 12.06.2025 / In allegato Preview UNI ISO 4301-5:2025 Apparecchi di sollevamento - Classificazione - Parte 5: Gru a ponte e a cavalletto La norma stabilisce una classificazione generale delle gru a ponte e a cavalletto e…
Leggi tutto
CEI EN IEC 60204-11 / Equipaggiamento elettrico delle macchine AT ID 24095 | 10.06.2025 / Preview in allegato Classificazione CEI: 44-15 Data pubblicazione: 05.2025 CEI EN IEC 60204-11Sicurezza del macchinario - Equipaggiamento elettrico delle macchine Parte 11: Prescrizioni per l'equipaggiamento…
Leggi tutto
Cassazione Penale Sez. 4 del 04 Giugno 2025 n. 20645 / Caduta del lavoratore per difetto chiusura sponda autocarro: responsabilità DL ID 24094 | 09.06.2025 Cassazione Penale Sez. 4 del 04 Giugno 2025 n. 20645 - Difetto nella chiusura della sponda dell'autocarro noleggiato e caduta all'indietro del…
Leggi tutto
Nota INL n. 964 del 04 giugno 2025 / Patente a crediti e lavoratore autonomo fittizio - criteri di applicazione delle sanzioni ID 24090 | 09.06.2025 / In allegato Nota INL n. 964 del 04 giugno 2025 Oggetto: Patente a crediti - disconoscimento natura autonoma rapporto di lavoro con Ditta individuale…
Leggi tutto
In situ generated active substances and their products / ECHA Aprile 2025 ID 24087 | 07.06.2025 / Version 2 April 2025 Information requirements and risk assessment for approval and authorisation Recommendations of the BPC Working Groups.________ Il presente documento ha lo scopo di assistere gli…
Leggi tutto
UNI EN 14373:2025 / Sistemi di soppressione dell'esplosione ID 24083 | 06.06.2025 / Preview attached UNI EN 14373:2025 Sistemi di soppressione dell'esplosione Data disponibilità: 05 giugno 2025________ La norma descrive i requisiti di base per la progettazione e l'applicazione di sistemi di…
Leggi tutto
Cassazione Penale Sez. 4 del 03 Giugno 2025 n. 20373 / Ferita con sega a nastro priva di protezione: Responsabilità DL ID 24801 | 06.06.2025 / In allegato Cassazione Penale Sez. 4 del 03 giugno 2025 n. 20373 - Ferita alla mano con la sega a nastro priva di protezione: Responsabilità del datore di…
Leggi tutto