Informazione tecnica HSE / 25 ° anno
/ Documenti disponibili:
45.565
/ Documenti scaricati: 34.463.658
/ Documenti scaricati: 34.463.658
Doc. 227/20 Unique Device Identifier (UDI) for Medical Devices Used in the Gas Industry
The new European regulation EU 2017/745 on Medical Devices, (MDR) will come into full application on 26th May 2020 and replaces the current Directive 93/42/EEC. It introduces, among others, totally new requirements concerning the registration and traceability of medical devices put on the market via an identification system based on a Unique Device Identifier (UDI).
This publication applies to the medical devices put on the market by the gas manufacturers according to the new medical device regulation EU 2017/745 and concerns the implementation of the requirements related to the UDI system.
This publication has been prepared to enable EIGA members to understand the overall UDI system and to efficiently implement these new requirements for the medical devices they are putting on the market as the legal manufacturer in compliance with the regulatory timeframe. It addresses the production of the UDI, the associated labelling and the registration of the medical devices in the UDI - EUDAMED database with a focus on the specificities of medical device gases and medical pipeline systems.
_______
Table of Contents
1 Introduction
2 Scope and purpose
2.1 Scope
2.2 Purpose
3 Definitions
3.1 Publication terminology
3.2 Technical definitions
4 EUDAMED database: registration of the operator and devices
5 Understanding UDI
5.1 General overview
5.2 Content of the Basic-UDI-DI
5.3 Content of the UDI-DI
5.4 Content of the UDI-PI
5.5 Legacy devices
6 Label characteristics
7 Issuing entities
8 Implementation dates
9 Application of the UDI to the gases industry
9.1 Application of the UDI to cylinders and dewars
9.2 Applying UDI to liquid gases delivered by cryogenic tankers
9.3 For Medical Device gases in bulk or loose
9.4 Applying UDI to medical gas pipeline systems and similar installations
9.5 For medical gas pipeline systems
10 Updating the Quality System
11 References
Appendix 1 – Nomenclature
...
Fonte: EIGA
Collegati:
Organizzazione del Fascicolo Tecnico di Costruzione e dei passi da seguire per redigere il documento di Analisi dei Rischi, produrre il Manuale d'Istruzioni per ...
Direttiva 2007/23/CE del Parlamento europeo e del Consiglio, del 23 maggio 2007 , relativa all'immissione sul mercato di articoli pirotecnici (Testo rilevante ai fini del SEE)
(GU L...

Regolamento recante modifiche al decreto 21 aprile 2017, n. 93, concernente la disciplina attuativa della normativa sui controlli degli strumenti di misura in servizio e ...
Testata editoriale iscritta al n. 22/2024 del registro periodici della cancelleria del Tribunale di Perugia in data 19.11.2024