Slide background
Slide background




Dust Explosion Prevention and Protection for Machines and Equipment Part 2: Conveyors, transfers and receiver

ID 2102 | | Visite: 7026 | Documenti Marcatura CE ENTIPermalink: https://www.certifico.com/id/2102

Dust Explosion Prevention and Protection for Machines and Equipment

Part 2: Conveyors, transfers and receivers

Collection of Examples - EN/DE

The compendium shall facilitate the responsible persons in the enterprises to assess the explosion risk when selecting and using machines and systems in explosive areas as described in this brochure and to decide on the protective devices in accordance with the risk assessment.

This part is a continuation of the ”Collection of Examples Part 1: Mills, crushers, mixers, separators, screeners” of the brochure ”Dust Explosion Prevention and Protection for Machines and Equipment“.

As described in various ISSA brochures, especially “Dust Explosion Prevention and Protection for Machines and Equipment - Basic Principles” (ISSA, 2004, Mannheim, ISBN 92-843-7129-5), both preventive and protective measures can be applied, as single measures or in combination.

In the following chapters typical dust explosion hazards and possible preventive and protective measures will be discussed for various machinery and installations.

In this brochure it is assumed that hybrid mixtures are not present.

This means that no flammable gases or vapours with a concentration of more than 20 vol. -% of the lower explosion limit (LEL) are present.

ISSA 2015

Dust Explosion Protection for Machines and Equipment - Collection of Examples Part 1: Mills, crushers, mixers, separators, screeners

Descrizione Livello Dimensione Downloads
Allegato riservato Staubexplosionsschutz an Maschinen und Apparaten Teil 2 Stetigförderer, Übergabestellen und Empfangsbehälter - Beispielsammlung.pdf
Beispielsammlung - Teil 2 Stetigförderer, Übergabestellen und Empfangsbehälter - ISSA 2004
15474 kB 32
Allegato riservato Collection of Examples Dust Explosion Prevention and Protection for Machines and Equipment - Part 2 Conveyors transfers and receivers.pdf
Collection of Examples - Part 2: Conveyors, transfers and receivers - ISSA 2015
18163 kB 179

Tags: Marcatura CE Direttiva ATEX Prodotti

Ultimi archiviati Marcatura CE

Feb 03, 2023 40

Decreto MISE del 19 marzo 2015

Decreto MISE del 19 marzo 2015 ID 18903 | 03.02.2023 Individuazione della documentazione da presentare ai fini dell'accordo preventivo per l'installazione di ascensori nei casi in cui non e' possibile realizzare i prescritti spazi liberi o volumi di rifugio oltre le posizioni estreme della cabina.… Leggi tutto
Dangerous fakes
Gen 23, 2023 90

Dangerous fakes trade in counterfeit goods

Dangerous fakes trade in counterfeit goods that pose health, safety and environmental risks OECD/EUIPO (2022) - 9 March 2022 Illicit trade in counterfeit goods causes economic damage by reducing sales and profits as well as innovation incentives in legitimate industries. At the same time, some… Leggi tutto

Più letti Marcatura CE