EN 1459-1:2025
EN 1459-1:2025 - Rough-terrain trucks | Part 1: Variable-reach trucks
ID 23931 | 05.05.2025 / Preview attached
EN 1459-1:2025
Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks
13.03.2026 Norma armonizzata Direttiva 2006/42/CE
Con la Decisione di esecuzione (UE) 2026/546 (GU L 2026/546 del 13.03.2026) la norma è entrata in regime di armonizzazione per la Direttiva 2006/42/CE "Direttiva macchine".
This document specifies the safety requirements of self-propelled rough-terrain variable-reach trucks (hereafter referred to as trucks), intended to handle loads, equipped with a telescopic lifting means (pivoted boom), on which a load handling device (e.g. carriage and fork arms) is fitted.
For the purpose of this document, rough-terrain variable-reach trucks are designed to transport, lift and place loads and can be driven on unimproved terrain.
Fork arms are considered to be part of the truck. Trucks can also be equipped with a variety of attachments (e.g. bale spikes, mowers, sweepers).
This document deals with all the significant hazards, hazardous situations and events relevant to the trucks when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document does not apply to:
- slewing rough-terrain variable-reach trucks covered by EN 1459 2:2015+A1:2018;
- rough terrain variable-reach tractors covered by CEN/TS1459-8;
- industrial variable reach trucks covered by EN ISO 3691 2:2016;
- lorry-mounted variable-reach trucks covered by ISO 20297 1:2017;
- variable-reach trucks fitted with tilting or elevating operator position;
- mobile cranes covered by EN 13000:2010+A1:2014;
- machines designed primarily for earth moving, even if their buckets and blades are replaced with forks (see EN 474 series);
- trucks designed primarily with variable length load suspension elements (e.g. chain, ropes) from which the load may swing freely in all directions;
- trucks designed primarily for container handling;
- trucks on tracks;
- trucks with articulated chassis;
- attachments.
This document does not address sound power level.
This document does not address hazards linked to:
- operation of the truck from a position other than the normal operating position or the remote control;
- hybrid power systems;
- gas power systems;
- gasoline engine systems;
- battery power systems.
This document does not address hazards which may occur:
a) when handling suspended loads which may swing freely (additional requirements are given in EN 1459 4: 2020);
b) when using trucks on public roads;
c) when operating in potentially explosive atmospheres (additional requirements are given in EN 1755:2015);
d) when operating underground;
e) when towing trailers;
f) when fitted with a personnel work platform (additional requirements are given in EN 1459 3:2015 and EN 1459 9:2021);
g) when using systems capable of controlling the speed of the truck as set by the operator (cruise-control).
This document does not provide a method of calculation for fatigue and strength of material.
This document is not applicable to trucks manufactured before the date of its publication.
...
Valid: 02.05.2025
Replaces: EN 1459-1:2017+A1:2020
...
Collegati
Articoli correlati Normazione
EN ISO 19085-6:2024 - Fresatrici verticali monoalbero (toupies)

EN ISO 19085-6:2024 - Fresatrici verticali monoalbero (toupies)
ID 21991 | 04.06.2024 / In allegato Preview
EN ISO 19085-6:2024 Macchine per la lavorazione del legno - Sicurezza - Parte 6: Fresatrici v...
UNI EN ISO 10218-2:2025

UNI EN ISO 10218-2:2025
ID 23739 | 03.04.2025 / In allegato Preview
UNI EN ISO 10218-2:2025
Robot e attrezzature per robot - Requisiti di sicurezza per robot industriali - Parte 2: Sistemi ed integrazion...
Certifico s.r.l.
Sede: Via A. De Curtis, 28 - 06135 Perugia - IT
Sede: Via Madonna Alta 138/A - 06128 Perugia - IT
P. IVA: IT02442650541
Tel. 1: +39 075 599 73 63
Tel. 2: +39 075 599 73 43
Assistenza: 800 14 47 46
www.certifico.com
info@certifico.com
Sede: Via Madonna Alta 138/A - 06128 Perugia - IT
P. IVA: IT02442650541
Tel. 1: +39 075 599 73 63
Tel. 2: +39 075 599 73 43
Assistenza: 800 14 47 46
www.certifico.com
info@certifico.com
Testata editoriale iscritta al n. 22/2024 del registro periodici della cancelleria del Tribunale di Perugia in data 19.11.2024

