Informazione tecnica HSE / 25 ° anno
/ Documenti disponibili:
44.307
/ Documenti scaricati: 31.891.630
/ Documenti scaricati: 31.891.630
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
ISO 13854:2017 enables the user (e.g. standard makers, designers of machinery) to avoid hazards from crushing zones. It specifies minimum gaps relative to parts of the human body and is applicable when adequate safety can be achieved by this method.
ISO 13854:2017 is applicable to risks from crushing hazards only and is not applicable to other possible hazards, e.g. impact, shearing, drawing-in.
NOTE For impact, shearing, drawing-in hazards, additional or other measures are to be taken
https://www.iso.org/standard/66459.html
Con la Decisione di esecuzione (UE) 2021/377 (GU L 72/12 del 3.3.2021), la norma è entrata in regime di armonizzazione per la Direttiva macchine 2006/42/CE.
________
In allegato Preview ISO 13854:21017 riservato Abbonati
This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety:
Others can be affected by the level of machinery safety achieved with the means of the document by the abovementioned stakeholder groups:
- machine users/employers (small, medium and large enterprises);
- machine users/employees (e.g. trade unions, organizations for people with special needs);
- service providers, e.g. for maintenance (small, medium and large enterprises);
- consumers (in case of machinery intended for use by consumers).
The abovementioned stakeholder groups have been given the possibility to participate at the drafting process of this document.
In addition, this document is intended for standardization bodies elaborating type-C standards.
The requirements of this document can be supplemented or modified by a type-C standard.
For machines which are covered by the scope of a type-C standard and which have been designed and built according to the requirements of that standard, the requirements of that type-C standard take precedence.
According to ISO 12100, in general, machinery is said to be safe if it can perform its function, be transported, installed, adjusted, maintained, dismantled and disposed of under the conditions of its intended use without causing injury or damaging health.
One method of avoiding the hazard of crushing of parts of the human body is to make use of the minimum gaps of this document.
In specifying minimum gaps, a number of aspects have to be taken into consideration, such as
Fonte: ISO
Vedi Documento tecnico sulla UNI EN ISO 13854:2020
Collegati:
Decisione di esecuzione (UE) 2024/201 della Commissione, del 10 gennaio 2024, che modifica la decisione di esecuz...
Decisione di esecuzione (UE) 2022/757 della Commissione del 11 maggio 2022 che modifica la decisione di esecuzione (UE) 2021/1182 per quanto riguarda le norme armo...
ID 20937 | 10.12.2023
UNI/PdR 146:2023
Studi professionali di avvocati e dottori commercialisti - Indirizzi operativi per la valutazione della conformità alla UNI 11871:2022
La prassi di...
Testata editoriale iscritta al n. 22/2024 del registro periodici della cancelleria del Tribunale di Perugia in data 19.11.2024