ISO 12100:2010 in revisione: attesa 2026

ISO 12100:2010 in revisione: attesa 2026 - Scheda allegata

ID 22983 | 14.12.2024 / News seguita - Download Scheda 14.12.2024

Il Documento attualmente in sviluppo (DIS) è alla fase 4 (di registrazione) del life cycle di ISO e potrebbe raggiungere la fase 6 (di pubblicazione) nel 2026. Seguiranno l'armonizzazione CEN (EN) e la pubblicazione UNI (UNI EN).

L'edizione della norma attualmente in vigore 2010 (1a), è stata in sviluppo per 2 anni dal 2008 al 2010.

Vedi Draft ISO/DIS 12100 (13.12.2024)
_________

ISO/DIS 12100 Safety of machinery - General principles for design - Risk assessment and risk reduction

Under development / DIS ballot initiated: 12 weeks - 13.12.2024 This Draft International Standard is in the enquiry phase with ISO members.

ISO 12100:2010 specifies basic terminology, principles and a methodology for achieving safety in the design of machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this objective. These principles are based on knowledge and experience of the design, use, incidents, accidents and risks associated with machinery. Procedures are described for identifying hazards and estimating and evaluating risks during relevant phases of the machine life cycle, and for the elimination of hazards or sufficient risk reduction. Guidance is given on the documentation and verification of the risk assessment and risk reduction process.

ISO 12100:2010 is also intended to be used as a basis for the preparation of type-B or type-C safety standards.

It does not deal with risk and/or damage to domestic animals, property or the environment.

Status : Under development
Stage : DIS ballot initiated: 12 weeks [40.20]
Edition : 2
Number of pages : 89
Technical Committee : ISO/TC 199
ICS : 13.110

[...]

scheda allegata

Collegati

Allegati

Allegati

	Descrizione	Lingua	Dimensioni	Downloads
	ISO 12100 2010 in revisione - attesa 2026 Rev. 1.0 2024 Certifico Srl - Rev. 1.0 2024	IT	228 kB	537
	ISO 12100 2010 in revisione - attesa 2026 Rev. 00 2024 Certifico Srl - Rev. 0.0 2024	IT	194 kB	609