Emission calculation guideline for road freight and intermodal journeys covering packed and bulk shipments

Emission calculation guideline
for road freight/intermodal journeys covering packed/bulk shipments

ID 24959 | 21.11.2025 / Attached

CEFIC/ECTA October 2025

This document is intended for informational purposes only and provides guidance on greenhouse gas (GHG) emissions calculation, primarily to assist smaller organisations that may not have in-house expertise. It aims to clarify the methodology outlined in the Global Logistics Emissions Council (GLEC) Framework, including Module 5 for the European chemical industry, and to illustrate calculations with examples while highlighting common pitfalls.

The information is provided in good faith and believed to be accurate, but no warranties or guarantees are made regarding its completeness, applicability, or suitability for any specific purpose. This document is not a substitute for reviewing the official GLEC Framework, applicable standards, or regulatory requirements.  
___________

Table of Contents

1. Definition of terms

2. GHG emission accounting process
2.1. Overall guidance on accounting steps 
2.2. Visual representation of Chemical Transport Chains
2.3. Importance of emission intensity for comparison & evaluation

3. Guidance to emission intensity calculations process steps
3.1. Step 1: Define TOC/HOC activity 
3.1.1. Identify Transport Chain Elements (TCE) of the Transport Chain 
3.1.2. Categorize your transport activities into Transport Operating Categories (TOC) and/or Hub Operating Categories (HOC)
3.1.3. Obtain activity information at TCE level in tonne-kilometre or equivalent 
3.2. Step 2: Calculate the GHG emissions by TOC/HOC 
3.2.1. Assign fuel and energy consumption to the corresponding TOC/HOC
3.2.2. Calculate emissions from own operations
3.2.3. Subcontracting
3.3. Step 3: Calculate the TOC/HOC intensity
3.4. Step 4: Calculate the total Transport Chain emissions 

4. Common pitfalls in calculation and reporting to be avoided
4.1. Data considerations
4.2. TOC selection 
4.3. Activity calculation 
4.4. Subcontracting
4.5. Historical reporting using a standard format
4.6. Transport emissions per consignment
4.7. Payload definition
4.8. Empty running

5. GHG emission accounting in value chain
5.1. Reporting GHG emissions
5.2. Attributing GHG emissions to a single scope or customer
5.3. Modelling GHG emissions
5.4. Data exchange of GHG emission accounting 

6. Suggested GHG emission reduction initiatives 

7. References to emission factors in the GLEC framework

[...]

Fonte: CEFIC




Info / download

Collegati
Calculating GHG transport and logistics emissions for the European Chemical Industry